Ask Experts Questions for FREE Help !
Ask
    pegasusfeather2000's Avatar
    pegasusfeather2000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2008, 09:23 PM
    Its cold in here furnace not igniting
    We have a nordyne mobile home furnace. Can hear it click on, but it is not igniting or blowing any heat. There is a red light blinking 3 times on a box that says "united technologies electronic controls". Can you help, please? It is cold in here.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 14, 2008, 09:52 PM
    here is you problem.

    Pressure Switch Closed with Inducer On = 3 blinks

    Drain water from pressure switch tube if present.

    Could also be pressure switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace problems cold [ 5 Answers ]

Need help fast my vents have cool air coming from them the furnace blower is working the furnace pilot light comes on and goes my thermastat says 78 inside but is set for 86 what could the problem be and how much might this cost

Day & night furnace not igniting [ 1 Answers ]

Hey all: I have a '73 Day & Night furnace that won't ignite after being shut down for the season. I have a pilot light and the unit reponds to the thermosat, at least the blower kicks on. I have seen a couple of things that might be possible fixes and wanted some other opinons. 1 -replace...

Furnace blowing cold air.starts out warm, goes to cold. [ 6 Answers ]

Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....

Goodman furnace not igniting [ 25 Answers ]

I have a Goodman furnace (I think, that's what the guy who came to give me an estimate for having central air installed said) and it won't ignite. I had a vent blocked to one room in the house because I was scraping paint and didn't want the dust in the ducts. It was blocked for about 20 hours. ...

Concord furnace not igniting - no click sound [ 1 Answers ]

I have a Concord 80% furnace apx. 4.5 years old. It has not been used for 6-7 months as the tenants were not paying the gas bill. Now that they are out, I went to start it up... and nothing. I get the igniter to light (M shaped Norton) and the system cycles, blower runs, but no "click sound"...

View more questions Search