Ask Experts Questions for FREE Help !
Ask
    sailrdon's Avatar
    sailrdon Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Feb 13, 2008, 08:09 AM
    Mildew on lumber - new construction
    As we dry out the walls in a new home, I've noticed that some studs have black streaks of mildew on them. I'm sure this resulted from the boards laying in stacks outdoors during rainy weather, not since they were put up. They are bone-dry now and we're ready to insulate. Will these boards be a problem in the future? Replacing them would be very difficult - they are on outside walls, already wired with power and low voltage wiring and passed framing inspection.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 13, 2008, 08:56 AM
    They should be OK but if you are worried about mold in general just mist them with a 1:4 mix of bleach and water.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Making a girder from 2X12 lumber [ 4 Answers ]

I am planning to build a 24 X 26, gable entry, 2 car (double door) garage with a 12/12 roof pitch so I can use the loft area for a studio. My idea was to run a 26 foot girder down the center to support the ceiling joists. My question is, if I make a girder by sandwiching 2 X 12 lumber, "what is the...

Treated lumber [ 2 Answers ]

How soon can I paint stained lumber? And could I used screws or nails on treated lumber?

Treated lumber [ 3 Answers ]

How soon can I paint treated lumber? And could I used screws or nails on treated lumber?

Name of lumber sizes [ 4 Answers ]

What would a piece of lumber the following sizes normally be referred to in the industry? a. 1-1/2" x 3-1/2" x 92.5" fir b. 1" x 5-1/2" cedar

Painting Treated Lumber [ 2 Answers ]

How long should you wait before you paint or stain treated lumber??

View more questions Search