My Kenmore Ultra starts a cycle and almost immediately goes to Door Open error - the repair guy who fixed my washing machine suggested it was the gasket - so we replaced that but we are still getting the error. Any more ideas? :confused:
|
My Kenmore Ultra starts a cycle and almost immediately goes to Door Open error - the repair guy who fixed my washing machine suggested it was the gasket - so we replaced that but we are still getting the error. Any more ideas? :confused:
Have you tested the door switch?
Quote:
Originally Posted by esquire1
How do I do that?
YOu will unplug the unit and remove 1 wire from the switch. Depress switch and check for continuity. If non the switch is bad and need replacing. Unit will not run if door is open or the switch is bad
| All times are GMT -7. The time now is 02:53 AM. |