Ask Experts Questions for FREE Help !
Ask
    doctorskin's Avatar
    doctorskin Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 28, 2008, 11:53 AM
    How can I make a safe connection to a gas dryer?
    I just bought a gas/electric dryer, I want to know if I could make a connection in the same way the stove is connected to the tank, I'm planning to have 2 gas tanks, 1 for the stove and 1 for the dryer. Please include any useful suggestions. Thanks a lot
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Jan 28, 2008, 12:08 PM
    If you are getting a new tank the people who install the second tank will be happy to professionally hook this dryer up to. You may not need a second tank if the first one is large enough. Best to call out the original company who supplies your propane to get their advice. You may not even need the second tank after all or may want to get a larger tank instead of having 2 tanks. When the propane people are there they will test the connections and hookups to see if there is any leakage. Propane is nothing to fool around with if you are not a professional due to all kinds of flammability issues.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Stoves connection to gas line [ 2 Answers ]

I had a serviceman connect my gas stove/range back up to the gas line. When I asked him if he used teflon tape or liquid pipe dope he said neither as my compression fittings was a type that did not need it. I was not aware there was such a compression fitting. The gas line does not appear to be...

Maytag gas dryer, replacing gas valve coils [ 5 Answers ]

Hi, I hope someone can help me. My Maytag gas dryer's igniter glows but then no flame appears. I believe it is the gas valve coils that are bad, so I purchased a replacement kit (3 coils). The instructions say to match the colors of the wires, but my replacement kit has red, black, white...

How to clean C.I. To make a good connection [ 3 Answers ]

I'm roughing in my basement bathroom... I've dug the trench and uncovered the old pipe which is looking pretty rough (my house was built in 1945). My question is, how can I ensure after I cut the pipe and piece in my PVC that I will get a good leak-free connection with the rubber couplers? Is...

Gas Dryer connection [ 3 Answers ]

I have a new gas dryer to replace an older one. The older unit was connected by black pipe from the inlet on the appliance to the gas supply (natural). There was a shutoff and a union. My question: Is it better to use a flexible type connecting pipe from the shutoff to the inlet or use 1/2"...


View more questions Search