Washer machine

TAINO Posts: 3, Reputation: 1

New Member

Jan 28, 2008, 08:36 AM

Washer machine

My washer machine overflows when washing it doesn't spin the water off, thank you

esquire1 Posts: 2,483, Reputation: 209

Ultra Member

Jan 28, 2008, 08:49 AM

The pressure switch is bad and need replaced. Cost about $35.00

Add your answer here.

Check out some similar questions!

Washer machine [ 17 Answers ]

Is the end of the water exit hose from the washer machine needs to be higher then the top of the washing basin of the machine. Could this connection be made with an air tight assembly that will not be looking more like a cut open pipe with a black plastic hose hanging in it? Thank you. Ps: I...

Washer machine mystery [ 1 Answers ]

Hi,I have a older kenmore washer part no.3352844 or model 110 4030090,the bottom part of the agitator is working fine but the top part which is supposed to spin the opposite way does not work well,it feels like it is slipping.Upon removing the snap lid I found 4 small plastic parts resting on top...

Washer machine [ 1 Answers ]

I have a 70 series Kenmore washer that stopped spinning. It pumps and drains but it won't spin. At first it stopped spinning on all cycles but one. Now it's not spinning on that cycle either. I've checked lid switch and the motor coupler... what next? Mike

Washer machine overflow [ 2 Answers ]

Hi ! It appears that the washer machine overflows when the water valve is turned on. The machine itself is not even running when this happens. The water overflow is dirty.We have to leave the water turned off to prevent further flooding. We are not currently living in this house. It is a...

Washer Machine Plumbing Help [ 7 Answers ]

All right, I live in a mobile home, and my water valves for th ewasher machine are leaking. I bought a new setup up valves that are brass. But I got to look and I have that poly something lines that the water run through. My question is can I use compression fittings to hook the poly lines to...