 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Dear sir, I purchased a honeywell digital thermostat, non programmable, and replacing the honeywell mechanical. The prooblem is i used terminals g y o w2on the old the new has e aux ygolrbc,i can hook up the gyo but,where does the brown wire go.the new honeywell is for heat pump also th321od ...
I am trying to install a new Honeywell rth221 thermostat. I have three wires that are white, red and green. I must be installing them incorrectly because the heat does not seem to come on no matter how I change them. Please help.
Whew! It's over a 100 degrees in this house. My blower will turn on but the outside compressor will not. I notice that I now have a loose yellow wire inside the Goodman furnace. This yellow wire comes from the Y terminal on the thermostat. It must be related to my problem, but I don't know...
I purchased a Ritetemp Thermostat model #8035c. The HVAC system installed in my condo is forced air furnace heat/electric compressor cooling and was manufactured by Gaffers & Sattlers (circa 1973). Any guidance on how to connect the wires to the thermostat is greatly appreciated. There are...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
