Ask Experts Questions for FREE Help !
Ask
    lfisablst's Avatar
    lfisablst Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 26, 2008, 11:17 AM
    How to change thermocouple on coleman 7900
    My pilot light will not stay lit. Somebody told me to change the thermocouple. I need to know how to get the old one out.

    Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 26, 2008, 05:45 PM
    Is this a mobile home? If it is you have to pull the entire burner out, change the thermocouple and purge the system upon re-assembly to get the gas to the pilot to lite.

    If you are not mechanically inclined or do not know what you are doing I suggest you call a professional. Gas especially propane gas can be dangerous to work on.

    Now if it is not a mobile home then the thermocouple will be right in front of the furnace mounted to the burner area along with the pilot just remove and replace.
    Johnny V's Avatar
    Johnny V Posts: 3, Reputation: 1
    New Member
     
    #3

    Mar 17, 2008, 02:19 PM
    I'm having a hard time pulling the burner out .Any suggestions?
    Johnny V's Avatar
    Johnny V Posts: 3, Reputation: 1
    New Member
     
    #4

    Mar 17, 2008, 02:19 PM
    How do I pull the burner out?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #5

    Mar 17, 2008, 02:35 PM
    On mobiles you usually have to unbolt the entire burner assembly plate from the furnace.This is after you disconnect the electric and gas line.

    If you are not mechanically inclined or do not know what you are doing I suggest you call a professional. Gas especially propane gas can be dangerous to work on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman 7900 series mobile home heating unit [ 1 Answers ]

I have a 1987 Coleman 7900 series heating unit that seams to work until it kicks off before reaching the temp set on the thermostat, leaving the pilot extinguished as well. The blower continues to run for a few minutes and then shuts off. Now because the pilot is no longer lit the unit cannot...

Burned out thermocouple [ 1 Answers ]

As I had stated in a previous question I have a few minor problems with the furnace in the fourteen years we have it. This is the most annoying one. I have replaced it at least 20 times. A service man installed one that lasted only seven days. I had the gas company install one and it lasted...

Coleman 7900 seires furnace coil [ 1 Answers ]

Does anyone know where I can get the coil that fits into a coleman 7900 series furnace that will give me central air during the summer?

Coleman 7900 Wall Furnace [ 1 Answers ]

1987 MOBILE HOME Colman 7900 Series,, the Furnace Will Not Shut Off Right. The Blower Keeps Going On And Off. The Flame Is Out, but The Blower Keeps Going On And Off. I Have Replaced The Wall Thermostat Twice, no Change... a So Called Tech Friend Of Mine Tried To Look At It. And He Replaced Two...

Thermocouple... can you test? [ 2 Answers ]

I had a problem with my water heater. Its only 3 years old and when it got turned back on it worked for a bit then stopped. I then couldn't get the pilot light to stay on... held for many minutes. Being uneducated in water heaters I just assumed it was the thermocouple. As I started to dissasemble...


View more questions Search