Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Running in wall Coaxial Cable from Existing wall
[ 7 Answers ]
Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...
Coleman furnace
[ 1 Answers ]
Does the upper limit switch act as a breaker? Will the red button pop up only when it needs to be reset? In other words, if the red button is not popped up does that mean it is working correctly?
Coleman Furnace
[ 1 Answers ]
I have a Coleman Furnace in my mobil home and it keeps shutting off and won't hold a temperature. I have had a furnace company out and they replaced a gas valve but it did not help. To get the furnace to start back up I have to turn the thermostat off and then back on. It will run for a while the I...
Coleman Furnace
[ 2 Answers ]
Our furnace is kicking on and off. Then it'll kick, but not go further to turn on the blower and heat? Do you think control issue or booster assembly>
Coleman Furnace
[ 1 Answers ]
Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with... View more questions Search
|