 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Washer and faucet, well shoot that knocks out my thoughts on a plugged cartridge. Check the stop on the hot supply line under the sink, is it before or after the washer tapping in and give that handle a counterclockwise twist just for insurance.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can anyone give me a reason as to why nearly completely cold water is coming out of my hot water tap in my bathroom but when I run the hot water tap in the kitchen the water is nearly boiling. The hot water and cold water taps are separate in the bathroom, where the kitchen has a handle which...
I was using my kitchen faucet just fine while I was cooking. I went to turn it on again (after I had used it less than 5 minutes prior) and the water spurted at my for a brief second and then quit. Now no water will come out of the faucet or the sprayer. Everywhere else in (and outside) the...
I have similar problem to similar recently posted question. Problem is with both hot and cold feed with mixer faucet. Water pump in basement from gravity fed well system. I have checked for leaks (None) opened all valves to full, all pipes leading to kitchen are insulated, aerator dismantled and...
I have what could be two problems. 1. The water pressure/flow in our kitchen sink is slow. Water comes out better when we use the sprayer. 2. It takes a very long time for the hot water to get hot and the facuet has to be in the exact spot for it to get at least warm water. We do not have...
The running water in the kitchen has gotten slower in the last month and a half, and no as of yesterday there is nothing, or very little. The water yesterday was still enough that you could function, I tried to turn off the water under the sink and then turn it back on but I got nothing. The...
View more questions Search
|
