Ask Experts Questions for FREE Help !
Ask
    steelerdan34's Avatar
    steelerdan34 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2008, 01:29 PM
    New stat now no work
    Have a heat only furnace reran new wirex3 red white green hooked up to new stat now will not turn on at all furnace or fan that is trying to heat house with wood burner and just run fan
    therinnaiguy's Avatar
    therinnaiguy Posts: 153, Reputation: 5
    Junior Member
    		  
    #2

    Jan 16, 2008, 08:23 AM
    Tell me you turned off the power to the furnace when you made the changes! OK, now look for a in-line fuse or one on the board. Typically the red and white wires are used for heat and the red and green are for the blower. Make sure red goes to R, white goes to W and green goes to G on both thermostat and furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

18-3 t stat [ 1 Answers ]

I have 18-3 coming out of the wall the problem is I have a new digital thermostat with no directions and I did not remove the old t-stat how do I find out what wire is what I live in a apartment with base board heat

Honeywell t-stat [ 2 Answers ]

I have a problem. I am NOT an electrician nor do I want to be one. I have been shocked more times in my life than I can count. I just remodeled my bathroom and put in a new gfci and a hot tub and new light fixtures. I thought I would get brave and replace all of the t-stats in my house with new...

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...

Replaced T-stat batteries... Now the AC/HEAT does not work at all! [ 5 Answers ]

Good morning and Happy Columbus Day everyone. I must say that anyone's help and feedback will be much appreciated. Last night the Thermostat (Honeywell Programmable CT8602) gave the low battery light as my wife was looking to drop it a degree before bed so she decided to replace the batteries. ...

View more questions Search