Ask Experts Questions for FREE Help !
Ask
    Hurdtown's Avatar
    Hurdtown Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2008, 08:14 AM
    Kenmore 80 series Knob removal procedure
    How do I remove the front cycle indicator knob of a Kenmore series 80 Model # 110.24832200 so that I can replace the broken plastic piece behind it? I tried to push the knob in and turn counter clockwise but that did not unscrew the knob as per mentioned at a different site. Please Help. It tough to know where I am when I finally get the wash cycle going. Thank you Greg of Hawaii
    fgfrank's Avatar
    fgfrank Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 14, 2008, 06:16 PM
    Greg,

    I was looking for a way also to remove this knob and I saw your question with no answer on it.
    Look behind the timer you will find a hole with a black pin inside, just pull on it and the knob in front will release,

    Regards Frank
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing machine knob removal [ 1 Answers ]

I need to know to remove the timer knod on a Whirlpool clothes washing machine?

Kenmore Timer Knob Removal [ 1 Answers ]

I have to replace the water temperature switch on my Kenmore Washer but am unable to rempve the timer knobs. How is this done? The timer knob actually consists of two knobs with a clear plastic disc between them.

Shower Knob Removal [ 2 Answers ]

I've replaced faucet washers before but never in this house (2.5 yrs in this old house). The knobs in the shower are hot and cold with the faucet in the middle for the batch. The knobs are mounted to the wall which is tiled. I removed the cap and unscrewed the screw in the middle of the knob, but...

View more questions Search