Ask Experts Questions for FREE Help !
Ask
    mwooodsprite2's Avatar
    mwooodsprite2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 30, 2007, 08:01 AM
    Kenmore dishwasher 15953 quit midcyle, no power, no lights
    Hello! Our Kenmore dishwasher 15953 was leaking. We fixed that. Now it stopped... dead... with about two inches of water at the bottom, just touching the heating element. My husband believes that if he could get the reset codes it would be helpful. Any suggestions? The last time we had a repairman out he replaced the heating element and the control panel (said replacing one required a new panel) the thing still didn't clean until my husband replaced the check valve and hose. Needless to say, we're reluctant to call Sears to repair it this time. Thanks for your help.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Dec 30, 2007, 08:19 AM
    IF the door switch is bad, nothing will work. You have to remove the panel to get to it. YOu can jumper around it for test purpose only. Verify that you do have power to it. i.e. the breker has not tripped
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher not working. Lights blinking, tries but won't work [ 2 Answers ]

I have a Kenmore 66516712000 dishwasher. Tonight my daughter's bathtub was on the counter above it and the seam cracked letting a baby bath full of water drip down the counter and into the dishwasher. Now it has various lights blinking (Cancel is on, and turns on though I did not ask it too) ...

Ceiling fan and bedroom/bathroom lights quit working [ 5 Answers ]

I was changing a light bulb in my ceiling fan and my bedroom and bathroom lights and ceiling fan quit working. I checked the breakers and nothing was tripped. I reset the breakers anyway and it is still not working. Do I need to check the wiring and if so, what do I check for?

Kenmore Dishwasher Lights Flashing [ 1 Answers ]

My Kenmore Dishwasher model 587.15072 started acting weird. Yesterday the hot dry (lock) and high scrub lights were on by themselves & when we opened the door the washer was heating but no water. We reset the power by flipping the breaker and then both of those lights were on but could not press...

View more questions Search