[Alex_Swirsky]

Hi,
I have a 2 computer coneccet to a di-524 router and want to conect to them with rdp,
I open the port 3389 for one of them and wonder how can I configure that the other computer will be configured in the router for rdp,
Ex1 192.168.0.10:3389 this the one I configured

Ex2 192.168.0.5:3379 the one I don't know how to do this in the router

Help me

Best regards

Alex

[biggsie]

I found this site and it looks like what you need

Using Remote Desktop with No-IP™

Please rate my answer -- If it helps you resolve your question

[Alex_Swirsky]

I found this site and it looks like what you need

Using Remote Desktop with No-IP™

Please rate my answer -- If it helps you resolve your question

Hi biggest,
I use the no-ip already,
As I told I configured one of the computers in the lan :192.168.0.10 and in the router port 3389

I want to configure the other computer 192.168.0.5 in the router in some port,lets say 3379

I did a conect test from out side the lan with my no-ip adrres to port 3389 and its work,

How can I make a rule in the router that port 3379 will be with 192.168.0.5

Best regards
Alex

[KISS]

Page 84 of the Di 524 manual. Changes are shown with "----->"

Step 1 Open your web browser and enter the IP Address of the router
(192.168.0.1). Enter admin for the username and your password (blank by default).
Step 2 Click on the Advanced tab and then click Virtual Server on the left side.
Step 3 You will create 2 entries.
Step 4 Click Enabled and enter
Settings:
Click Apply and then continue
Step 5 Enter 2nd entry:
Click Enabled
Click Apply and then continue.
NAME - Gamespy1 -----> rdp2
PRIVATE IP - The IP ---->192.168.0.5
Address of your computer
That you are running
<whatever> from.
PROTOCOL TYPE - Both ----> (Means TCP and UDP ports)
PRIVATE PORT - 3783 ---->3379
PUBLIC PORT - 3783 ------> 3379