Ask Experts Questions for FREE Help !
Ask
    RDC1965's Avatar
    RDC1965 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2007, 03:59 PM
    Indicator lamp
    :confused: My malfunction indicator lamp light come on in my 2004 Honda accord LX. What could be the problem ?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 13, 2007, 05:02 PM
    Take your car to AutoZone and they will connect a scanner to the Data Link Connector and tell you what Diagnostic Trouble Codes are stored in the computer. AZO will do this for free.

    First, ensure your gas cap is closed tightly.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jan 7, 2008, 07:31 AM
    Why have Cap Tight, not disagreeing, curious.
    I have run into Fuel starvation due to clogged Vent. Fuel pump would pump until Vacuum became too great. Thanks
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Jan 7, 2008, 09:06 AM
    If the cap does not seal properly, the CEL will come on and a DTC will likely be thrown.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #5

    Jan 7, 2008, 01:55 PM
    Ah, Thanks. I knew if you said it, there was a reason.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a 3 way lamp [ 3 Answers ]

I am rewiring an old electrical hurricane lamp that has a small bulb in the bottom part and a regular bulb in the top. The appliance has 3 connector poles (one copper and two silver). What wires go where? There are two wires, one connected to the outlet and one from the small bult in the bottom...

Turn indicator problems [ 2 Answers ]

1999 Chevy Lumina; right turn signal when engaged will click very fast for about 10 seconds and then start working. Doesn't do it every time I use it , just intermittenly. Can any one offer an answer? Thanks, Prairie Son

View more questions Search