Ask Experts Questions for FREE Help !
Ask
    ViVid's Avatar
    ViVid Posts: 31, Reputation: 0
    Junior Member
    		  
    #1

    Dec 10, 2007, 06:46 AM
    Heat pump
    Suppose your working in a one-family dwelling that supplied with 120/240V service. The home has a 240-volt heat pump rated at 25 amp's the size of the home is 2200 square feet also with10 kW range a 5 kW water heater a1.5 kW dishwasher a 1.3 kW compactor and 18 kW electric baseboard heat. Question 0ne is what would be kVA for this heat pump? Question two is what would be the total load for service for this home I can never seem to get my load calculations correct thanks a ton:D
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 10, 2007, 06:57 AM
    KVA = volts times amps / 1000

    What do you have for calcs?

    Seems you are working on a workbook test for E2.

    I won't be doing your homework, it this is a test.
    ViVid's Avatar
    ViVid Posts: 31, Reputation: 0
    Junior Member
    		  
    #3

    Dec 10, 2007, 07:26 PM
    No this is not a test its questions to do with one of are work sites JR NCO your not doing my homework
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Dec 11, 2007, 03:39 AM
    Then show me what calcs you do have. I can help from there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

20 yr old Lennox heat pump fan blows constantly in heat mode [ 5 Answers ]

20 year old Lennox heat pump - outside temps been 30's at night, 40's daytime UPDATE: I went outside and the unit is covered in frost on 3 sides! I've been reading on Google about frosted heat pump units and can't determine how to manually defrost it. Apparently, the auto defrost is not...

Nordyne heat pump high suction in heat [ 1 Answers ]

I have a 2 yr old heat pump.in heat mode at 40 deg outside I have 120 psi on the suction and 160 psi on the disc. 99 deg. At discharge from condenser.first season for heat.sounds like a stuck or leaking reverse valve. Any suggestions. Thanks ps I tried switching from air to heat a few times

Heat pump thermostat Aux. Light is going on when no resistance heat used. [ 2 Answers ]

I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...

Ductless A/C with Heat Pump - Heat pump does not come on [ 1 Answers ]

Hi The A/C works great but in the morning when its cool outside and I switch on the Heat the indoor unit makes a clicking sound and the fan stays off - after about 8 minutes I switch to A/C I get a rush of ice cold air along with some mist. Seems like when I switch to heat the indoor unit...

View more questions Search