Ask Experts Questions for FREE Help !
Ask
    sacramento's Avatar
    sacramento Posts: 163, Reputation: 1
    Junior Member
     
    #1

    Dec 9, 2007, 01:18 PM
    Non-programmable thermostat
    I have an old heating thermostat which you can only set to one temperature. We have had it set at 69 degrees for the past couple of months without ever changing it. For the most part, we have been quite comfortable. We have never been cold but sometimes we get a little too warm. I terms of economics, is it better to maintain one temperature all of the time or would it be better if we raised and lowered it as needed. Thanks for your advice. Everything we do is done with limited income in mind and lowering or increasing our heating (gas) bill would not be a very good thing. Thanks again!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 9, 2007, 05:55 PM
    The lower the temperature the more energy savings. Real simple.
    sacramento's Avatar
    sacramento Posts: 163, Reputation: 1
    Junior Member
     
    #3

    Dec 9, 2007, 08:10 PM
    I understand that! You are not answering my question. Is it better to move the thermostat up and down or to leave it at one setting? My husband claims it is better to find one single setting and to leave it alone.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #4

    Dec 9, 2007, 08:24 PM
    One setting and leave it
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #5

    Dec 9, 2007, 09:15 PM
    HVAC1000 and I agree on this one. The lower the setting, the less gas you use. Crank it down when you won't be around, and the furnace will run less. Yes it will have to run a while when you turn it up again, but less than it would have if you left it up.

    Many people turn it down at night and put an extra blanket on the bed.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #6

    Dec 9, 2007, 10:21 PM
    ((You are not answering my question))

    I understood your question.

    When you turn it down you will save energy because at a lower temperature you will be heating the structure less (SAVE GAS) When you heat it back up you will never use the amount of gas you would have used as if you left it at the same temperature.
    Sorry to say but your husband is wrong. He is probably wrong on purpose because he does not like it when the thermostat is lowered to save energy because he gets cold.
    Husbands and wife's are like that with the thermostat that is why this house uses a computer to control all three zones/ three thermostats. My wife cannot change the temperature with out the password.LOL

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Programmable Thermostat [ 1 Answers ]

I have a Honeywell thermostat T8624D and now is not working correctly. The thermostat Has four settings, wake, leave, return and sleep. The problem that is that the wake setting stays on rather than defaulting to other time zones i.e. leave , return etc.. Is there a way to completely clear the...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Programmable thermostat [ 1 Answers ]

What kind of programmable thermostat do I need for my 2 zone system

Programmable thermostat [ 1 Answers ]

I have bought a house with a Hunter Programmable thermostat model #47250 (not #47250A) and need help to program it. Anyone have the instructions?

Programmable Thermostat [ 1 Answers ]

Problem with thermostat losing it's power and reseting


View more questions Search