 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Weil-mclean boiler shutting down on safety
I have a Weil-McLean boiler that vents trough the wall and has no pilot light. When I turn it on it goes through the purge stage then turns on the glow plug ignighter which comes on the starts the main gas flow which ignights but then it shuts down within 10 seconds. What is wrong with this boiler. It seem as though this is a safety shutting this down what need to be done. Thanks
Charles Hinchey |
||||
|
||||
|
This sounds like a high efficiency condensing boiler. Before it gets messed up more than it is please contact a Weil-McLean dealer for repair. There could be a imbalance having to do with burner adjustments and you will need special tools to correct this adjustment problem.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am considering a Ultra 230 boiler and in looking over the documentation I have three questions: 1. What the heck is a "condensing" boiler? 2. Will this boiler system work with cast iron radiators? 3. The piping diagram shows a 12" long connection atop the boiler between the input and...
The hot water radiators in two of my four zones heating my home are not getting hot even after increasing their thermostats to 80 degrees F. If there is a bubble in the circulating pipes how and from where do I bleed the system? I have a relatively new Weil-Mclean furnace (three years old). Thanks!
My boiler filled up with water. The pressure release valve was dry but water came into the fire pit and out through the motor. What happened?
I have a Weil Mclean oil furnace The hot water temp. gets extremely hot. Can you tell me how to adjust this?
The green power light goes on then just blows and nothing else occasionally it wiil go green then the purge light will come on steady then stop and sometimes it goes all the way the ighnighter lights and the flame comes on but goes out in like 10 seconds... please help
View more questions Search
|
