Ask Experts Questions for FREE Help !
Ask
    mike1764's Avatar
    mike1764 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2007, 06:48 AM
    Gas furnace problems
    I have a energy efficient furnace which comes on than egnites the gas than shuts down. Than it recycles and keeps doing it what do I do
    tsa7man's Avatar
    tsa7man Posts: 154, Reputation: 9
    Junior Member
    		  
    #2

    Nov 19, 2007, 06:51 AM
    By what you described it is most likely a flame sense problem, clean the flame rod with sandpaper or rough steel wool, and see if that corrects your problem.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Nov 19, 2007, 12:35 PM
    Likely so, you may find helpful details at https://www.askmehelpdesk.com/heatin...ons-58313.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Furnace problems [ 7 Answers ]

My Evcon/Coleman propane furnace is starting up but the pilot lite will not ignite... When you set it to come on it kicks on but there is no fire through the peep hole.It is about 11 years old. Does anyone have any advise on what the problem could be?

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

Gas Furnace Sensor Problems [ 2 Answers ]

I live in an apartment that has a gas furnace. Periodically the furnace stops working. The gas will kick on and cut out. My landlord has had several people to fix it. They come and clean the sensor and whatever else. Then it works fine for a while and then the same problem happens again. My...

Concord Gas Furnace with run time problems. [ 5 Answers ]

We have a Concord Gas Furnace that is about 3 years old. The furnace seems not to respond to the thermostat. We replaced the thermostat with a new digital one but are still experiencing the same issues. We set the thermostat to 83 just as a test. I had my wife record when the furnace came on...

3 yr old Goodman Gas Forced Air Furnace problems [ 10 Answers ]

If thermostat is set to 70-90 degrees the furnace burner and blower will run constantly and the temp never gets above 68 degrees in the house. I have a Lux programmable thermostat and was thinking of replacing it with a Honeywell. I have a new filter. Any ideas? The weather has been in the...

View more questions Search