Ask Experts Questions for FREE Help !
Ask
    ccaatt's Avatar
    ccaatt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2007, 08:04 AM
    Trane furnace
    I have a blower motor on a trand furnace, what would cause the motor to vibrate?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 16, 2007, 09:25 AM
    If the motor did not vibrate before but now is starting then I suspect a bearing ging bad or debris building up on the cage. Use a shop vac with a brush and clean off all the fins. Make sure the power is off to the furnace fist. Grab the housing and the cage and see if there is any movement side to side or up and down.
    cinwnst's Avatar
    cinwnst Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 12, 2008, 10:11 PM

    What does open high limit device mean?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace does not come on [ 3 Answers ]

We have central AC/Heating with separate Bryant heating and AC units that are controlled from the same thermostat in the house. When I turn the Heat ON and set Temp to way higher than current Temp, the light on the thermostat comes on but the heating unit does not go on... no sound of burners...

New furnace [ 1 Answers ]

I had a friend come out and look at my furnace because I was having some a/c issues and prior to it getting hot I was having some heating issues. Well the result is that my motor went. The furnace is/was about 25+ years old. I now have to purchase a new furnace. Where do I start?And does this...

Quote on 2 1/2 ton Trane XR13 and var spd Trane Blower [ 2 Answers ]

I was just quoted on a 2nd floor A/C replacement, condenser and var speed blower, 2 1/2 ton Trane XR13 with upgrade options. Live in CT Are these prices sane ? Includes removal of old unit, upgrade of refrig line, added insulation on old ductwork - work to be done in walkup attic Quote...

Furnace does not stay on [ 2 Answers ]

Hi I have a 115,000btu goodman furnace and when I go to start it in attempt to run but the burner does not stay on. It sound like there is a lot of condersation inside the unit

Furnace blower [ 1 Answers ]

I have a older home with a older furnace. I started it up this fall and the blower continues to run after the house has warmed and the themostat has turned off. The blower runs and runs, blowing cool air. To stop it I have to turn off the main switch to the furnace. What do you think the...

View more questions Search