Ask Experts Questions for FREE Help !
Ask
    may tag's Avatar
    may tag Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 14, 2007, 06:56 AM
    Exploded rug in Maytag Washer
    I washed a small rug in my Maytag front loading washer. It exploded. What is the best way to clean the washer and make it functional again?

    Thanks
    charlotte234s's Avatar
    charlotte234s Posts: 1,903, Reputation: 143
    Ultra Member
     
    #2

    Nov 14, 2007, 08:53 AM
    Why did the rug explode? Did it have oil of some type? If so, you probably can't use that washer anymore, it may cause an explosion if the oil got anywhere inside, and you can't get at all the crevices. I'm no expert though, but that's the safest advice I can give, is don't use the washer anymore until you definitely know it's clean and safe.
    may tag's Avatar
    may tag Posts: 2, Reputation: 1
    New Member
     
    #3

    Nov 14, 2007, 02:20 PM
    The rug came apart into many pieces. It is all over the drum and possibly the drain.

    Thanks
    charlotte234s's Avatar
    charlotte234s Posts: 1,903, Reputation: 143
    Ultra Member
     
    #4

    Nov 14, 2007, 03:45 PM
    Did it just get shredded or did it like, EXPLODE?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #5

    Nov 14, 2007, 08:53 PM
    I's say use a wet/dry vac or wait until the pieces dry (use a fan) and use a regular vac to remove them.

    Add some water like you would normally do clothes, but stop the timer and move it to the spin cycle and pump it out. If there appears to be no problems, do a shallow load of nothing.
    Put a screen in the tub to collect the debris. Add water and pump it out until the discharge is clear of debris.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Washer [ 2 Answers ]

Maytag washer model #LAT8006AAE jumps around as if is out of balance, even on small loads. Any idea as to what causes this? It is level. Thanks

Maytag Washer [ 2 Answers ]

I have a Maytag washer, It pumps the water in but it doesn't spin. It was working very well and it just happened today. What can be wrong? Thanks


View more questions Search