Ask Experts Questions for FREE Help !
Ask
    sabfk's Avatar
    sabfk Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 11, 2007, 03:15 PM
    HoneyWell Thermostat Wiring RTH230
    Hi,

    I am trying to install a HoneyWell RTH230 programmable thermostat to replace our old Honeywell round thermostat. I have a Miller gas furnace and electrical central air. The wiring to the old thermostat was as follows:

    Red
    Orange
    White
    Yellow
    Green

    There were also blue and black wires coming out of the wall but not hooked up to the thermostat.

    I hooked up the new thermostat as follows:

    Red to Rh
    Orange to Rc
    Yellow to Y
    Green to G
    White to W

    And left the blue and the black ones unattached. The heat seems to be working fine but I cannot get the AC to come on? Any ideas?

    Thanks for your help.
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #2

    Nov 11, 2007, 07:18 PM
    Disconnect the orange and put a jumper between rh &rc you should be fine ac should work
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #3

    Nov 11, 2007, 07:35 PM
    If that doesn't work, check what the orange is connected to at the furnace. You may want to look at the sticky at https://www.askmehelpdesk.com/heatin...ons-58313.html

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring honeywell thermostat [ 2 Answers ]

Dear sir, I purchased a honeywell digital thermostat, non programmable, and replacing the honeywell mechanical. The prooblem is i used terminals g y o w2on the old the new has e aux ygolrbc,i can hook up the gyo but,where does the brown wire go.the new honeywell is for heat pump also th321od ...

Honeywell rth230 b programing [ 1 Answers ]

How do I set the temp to come on at 6 am and how do I set it to go off at 11 am and to go on again at 5 pm and shut off @ 12 am:

Honeywell RTH230 Programmable Thermostat [ 2 Answers ]

We have replaced our old thermostat with a Honeywell RTH230 programmable, and it's been over 30 minutes and the a/c has not kicked on. Is there anything that we should check or do?

Wiring Honeywell TH8320U1008 thermostat [ 0 Answers ]

Hi: Happy holidays, all. Got a TH8320U1008 thermostat for Xmas. Want to install it myself (hopefully, not A bad idea). Honeywell's tech line says it should be professionally installed, and Gave me two locals. First I called says nope, they don't mess around w/ heat pumps. Second was...


View more questions Search