Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower drainage slow
[ 4 Answers ]
We removed our old tub/shower and put in a new shower stall only. We moved the shower to the opposite wall and had to move some plumbing and the sewer hook up. The couple times we used it it worked fine. Now it drains very very slowly. This is what we did. We moved the shower drain...
Venting/Drainage a new Bathtub into an existing sunk in shower
[ 2 Answers ]
Okay, Basically. The sunk-in shower is obviously lower than the bath tub. And I wish to connect the new drain from the tub to the existing 2" drain from the shower. My question is: How would I go about venting (if needed) and connecting the new tub that is 4' away from the existing drain, Without,...
Standing bath shower is filled with drainage stuff-Please help
[ 3 Answers ]
Hi, I've got quite a situation going here. I own single family house (Rambler Type), and have a main level and a Basement. The Main level has two full bath rooms and the Basement has one full bathroom (standing bath and a toilet sink). We rarely use the Bath room in the Basement. It is only used by...
New shower install
[ 3 Answers ]
I want to install a shower in a room next to where there is an existing toilet and sink. My question is on venting the new shower. I have access to the basement area, can I hook up the shower drain to the existing sink drain in the basement area. Will this properly vent the new shower? The...
Best way to install fixed shower head and personal shower
[ 4 Answers ]
I am installing a new shower setup. I want to install a fixed shower head as well as a hand held personal shower with hose. On the Kohler website they sell a diverter valve with some sort of backflow valve for this purpose. I have a friend who just had this done and he has no diverter valve just... View more questions Search
|