Ask Experts Questions for FREE Help !
Ask
    lewyboy's Avatar
    lewyboy Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 5, 2007, 12:22 PM
    In Line blower motor
    I am trying to wire a blower motor into an existing duct to increase flow because it goes to a upstairs bedroom.Problem is, the condeser motor has 5 wiers inline motor has 2, which wires do I use on the condenser motor 2 brown capasitor wires,purple wiree going to breaker, red wire going to a relay ?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 5, 2007, 12:45 PM
    Hint:

    It's not the capacitor, so it must be purple and red will be power to the AUX blower.

    Your other choice, would be to add a 24 VAC relay in a junction box where the motor is going to be located and wire the coil side (24 VAC) to activate this relay and take power at a convenient place close to the booster fan location.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor [ 1 Answers ]

I have a Coleman airhandler which is about eleven years old. I had a new Nordyne heatpump installed about a year and a half ago. It worked fine until a month ago, now the blower will only go off when the breaker is turned off. The thermostat has no effect on it, however the a/c cycles fine. Could...

Blower motor [ 2 Answers ]

My blower motor for my furnace is not spinning. I opened up the cover and asked my wife to turn on the AC. When she turned it on,the motor just made a humming sound, but the cage did not spin.When I touched the motor it was pretty hot and there was a faint burning smell. Do I need to buy a new...

Blower motor [ 2 Answers ]

My blower motor won't stop running . Heat or A/C compresor won't turn on. Tapped on relay still don't shut off. It is a Carrier model#58GS100-2 please help hott in here. Thanks

Blower motor [ 1 Answers ]

THere is no air blowing when the heat is on. The furnace does come on but no air blows. If I turn the heat off and manually turn the fan on the air blows. If I leave the fan switch in the on position and turn the heat on the air stops.

Blower Motor [ 1 Answers ]

I have read multiple posts about wiring for blower motors and saw one that almost answered my question. I have an old blower motor that I would like to convert to a shop air filter. I know that it is a multi-speed motor. It has 8 wire connections and are labeled as such: Power cap cap ...


View more questions Search