Ask Experts Questions for FREE Help !
Ask
    CGFriedrich's Avatar
    CGFriedrich Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2007, 06:03 PM
    Maytag washer won't spin Model # MAV6057AWW
    I have a Maytag Washer Model # MAV6057AWW. The washer fills, agitates, lets standing water out of the tub, but will not spin, to remove excess water from the clothes. I have tried other wash cycles, but with the same results. Do I have a sheared pin somewhere? Please let me know what you think.

    Thanks

    Chuck
    applsvcgirl's Avatar
    applsvcgirl Posts: 112, Reputation: 9
    Junior Member
    		  
    #2

    Nov 5, 2007, 08:57 AM
    From your description it sounds like you need to replace the thrust bearing kit. I would also (for good measure) replace the belt at the same time. The new thrust bearing comes with very good instructions and is easy to replace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE Washer Model #WWSR3090TAWW washes, but does not spin [ 12 Answers ]

I have a GE washer that goes through the wash cycle perfectly fine, then after the water drains out, it will not spin. You can hear noise, but no spinning. Then it will fill back up with water, drain again, but again, no spinning. Can it be the motor causing this, or possibly something else? ...

Maytag Neptune washer LOUD spin out [ 7 Answers ]

Our refurbished Maytag Neptune washer was so quiet spinning out when we first got it two years ago. Now It is so loud when spinning out, we cannot hear each other talk. What can I do? (This is the same reason we replaced our last washer!) If it matters we do at least 15 loads a week... probably...

Maytag Washer model LAT9316AAE [ 2 Answers ]

I need a diagram of my maytag washer to replace the spin cycle belt # 211124. Maytag washer model # LAT9316AAE

View more questions Search