Ask Experts Questions for FREE Help !
Ask
    snelson472's Avatar
    snelson472 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2007, 01:28 PM
    Frigidaire wall oven lower element inop
    I have a Frigidaire wall oven mod # FEB30SABA and the lower heating element is not heating at all. I replaced the element and still no heat. I pulled the feed wires into the oven and checked for voltage with the oven on. No voltage. What next?
    Thanks
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Nov 3, 2007, 08:19 PM
    Jnelson472- It sounds to me that if ,it's not getting power at the element , then it is probley your (lower Control switch ) First chec to make sure a breaker or one of 2 screw in fusses are OK. If not one of these 2 , then go to the temp. setting switch. Good luck F.B.E.
    snelson472's Avatar
    snelson472 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 4, 2007, 07:14 AM
    Quote Originally Posted by snelson472
    I have a Frigidaire wall oven mod # FEB30SABA and the lower heating element is not heating at all. I replaced the element and still no heat. I pulled the feed wires into the oven and checked for voltage with the oven on. No voltage. What next??
    thanks
    Thanks FBE, Turns out there is proper voltage to both elements when oven is on. I figure the new element is defective and am getting another one.
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #4

    Nov 4, 2007, 10:10 PM
    I'm Glad you found it. Just turn off piwer at panel before starting, Stay safe and good luck. F.B.E.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Frigidaire range bake and broil element [ 20 Answers ]

Hello, We have a Frigidaire slide-in ceramic smooth top range. It is a Canadian model CPES389CA1. Seemingly no parts manufacturer on the Internet knows about this model. The range is five years old and it had less than normal use. Now there is no heat from bake or broil element anymore....

Bake element in GE Oven Model # ZET857BB2BB [ 1 Answers ]

The bake element in the top oven of my double convection oven has ceased to work. The broil element and everything else is working fine. How do I access the bake element which, apparently, is under the floor of the oven?

Downdraft Stove oven element not working [ 2 Answers ]

I have a Whirlpool Downdraft stove and the lower element has stopped heating up. I have the 'element' but I don't know how to install it. Do you have to remove the stove from the wall? I wouldn't think so, but I can't seem to find a way to install it from 'inside' the stove. Please...

Electric wall oven bake element wire [ 5 Answers ]

Hello Thinking I was on a roll after rewiring my ceiling fan I decided to replace the bake element on my kenmore electric wall oven that died the other night-how hard could it be to do? I turned off the breaker-unscrewed the element and gently pulled it out. One side had the wire attached-one did...

View more questions Search