I have a Frigidaire wall oven mod # FEB30SABA and the lower heating element is not heating at all. I replaced the element and still no heat. I pulled the feed wires into the oven and checked for voltage with the oven on. No voltage. What next?
Thanks

Jnelson472- It sounds to me that if ,it's not getting power at the element , then it is probley your (lower Control switch ) First chec to make sure a breaker or one of 2 screw in fusses are OK. If not one of these 2 , then go to the temp. setting switch. Good luck F.B.E.

Quote:

---

Originally Posted by snelson472

I have a Frigidaire wall oven mod # FEB30SABA and the lower heating element is not heating at all. I replaced the element and still no heat. I pulled the feed wires into the oven and checked for voltage with the oven on. No voltage. What next??
thanks

---

Thanks FBE, Turns out there is proper voltage to both elements when oven is on. I figure the new element is defective and am getting another one.

I'm Glad you found it. Just turn off piwer at panel before starting, Stay safe and good luck. F.B.E.