|
 |
New Member
|
|
Nov 1, 2007, 08:23 PM
|
|
|
How to install a honeywell RTH110B
Hello there I just got a honeywell RTH110B and I need help to install it I have a central heating and cooling system it have 5 wires a blue ,red,white,green and yellow can you help me and tell me were the wires go thank you for your time
|
|
|
 |
Heating & Air Conditioning Expert
|
|
Nov 3, 2007, 08:35 AM
|
|
|
|
|
|
| Question Tools |
Search this Question |
|
|
|
Add your answer here.
Check out some similar questions!
Wiring for a RTH110B Honeywell Thermostat
[ 2 Answers ]
My old thermostat had six wires, blue, red, green, white, yellow, and black. But my new Honeywell RTH110B none programmable thermostat only gives instructions for wiring up to 5 wires. The connections are Rh Heating power supply, Rc Cooling power supply, W Heating signal, Y Cooling signal, G fan....
Wiring for a RTH110B Honeywell Thermostat
[ 4 Answers ]
My old thermostat had six wires, blue, red, green, white, yellow, and black. But my new Honeywell RTH110B none programmable thermostat only gives instructions for wiring up to 5 wires (Rh, Rc, W, Y, G). How do I wire my new thermostat using the six previously used from my old thermostat?
...
Rth110b honeywell thermostat
[ 1 Answers ]
I had an old honeywell thermostat with six wires coming out of the wall. Light blue, red yellow ,orange, green,and white. The new thermostat only has 5 spots rc, rh, yellow, white, and green. I have a central heat and air system. I know absolutely zero about any of this stuff. Any clue how to...
Honeywell RTH110B not cooling
[ 1 Answers ]
I am replacing a Janitrol HPT18-60 with a Honeywell RTH110B thermostat. I hooked up all the wiring accordingly with the 5-wire diagram as I have all five wires (y,g,r,b,w) and the heat will work, but the cooling will not. I have an outside heat pump. I also live in a mobile home if that makes a...
Honeywell RTH110B Thermostat
[ 2 Answers ]
My furnace thermostat was taken off the wall while moving furniture now I have 3 wires hanging out of a whole in the wall. I would like to hook those wires up to Honeywell RTH110B but I’m not sure which wire goes where. On the red wire I have 24vac, on my white wire I have 12vac and I have a blue...
View more questions
Search
|
