Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring for a RTH110B Honeywell Thermostat
[ 2 Answers ]
My old thermostat had six wires, blue, red, green, white, yellow, and black. But my new Honeywell RTH110B none programmable thermostat only gives instructions for wiring up to 5 wires. The connections are Rh Heating power supply, Rc Cooling power supply, W Heating signal, Y Cooling signal, G fan....
Wiring for a RTH110B Honeywell Thermostat
[ 4 Answers ]
My old thermostat had six wires, blue, red, green, white, yellow, and black. But my new Honeywell RTH110B none programmable thermostat only gives instructions for wiring up to 5 wires (Rh, Rc, W, Y, G). How do I wire my new thermostat using the six previously used from my old thermostat? ...
Honeywell RTH110B not cooling
[ 1 Answers ]
I am replacing a Janitrol HPT18-60 with a Honeywell RTH110B thermostat. I hooked up all the wiring accordingly with the 5-wire diagram as I have all five wires (y,g,r,b,w) and the heat will work, but the cooling will not. I have an outside heat pump. I also live in a mobile home if that makes a...
Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D
[ 1 Answers ]
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...
Honeywell RTH110B Thermostat
[ 2 Answers ]
My furnace thermostat was taken off the wall while moving furniture now I have 3 wires hanging out of a whole in the wall. I would like to hook those wires up to Honeywell RTH110B but I’m not sure which wire goes where. On the red wire I have 24vac, on my white wire I have 12vac and I have a blue... View more questions Search
|