Ask Experts Questions for FREE Help !
Ask
    bluejenna's Avatar
    bluejenna Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2007, 10:57 AM
    Blower working no heat
    Hello, I have a Honeywell fan assisted combustion gas furnace that is 10 years old. My problem is that the blower goes on and we can see the light but there is no gas coming out. We replaced the ignition thing(sorry) and then tried it again and it didn't work. Is there anything we could try or should we just call aprofessional and get it over with? Thank you for your help.
    Kanadakid's Avatar
    Kanadakid Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Oct 30, 2007, 11:15 AM
    Does the control module /board light up green ?
    Flashing Yellow ?
    Red
    Flashing Red ?

    Is this LP gas or natural gas ?


    Kid
    bluejenna's Avatar
    bluejenna Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 30, 2007, 11:20 AM
    Quote Originally Posted by Kanadakid
    Does the control module /board light up green ?
    Flashing Yellow ?
    Red
    Flashing Red ?

    Is this LP gas or natural gas ?


    Kid
    Hello, I don't have much of an answer. : Does the control module /board light up green ?
    Flashing Yellow ?
    Red
    Flashing Red ?

    I don't see any kind of control module board. Nothing with any green, red or yellow lights. It is natural gas. Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan Blower not working in "ON" or "AUTO" in heat or AC [ 13 Answers ]

Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...

Blower not working with Heat- OK with AC [ 2 Answers ]

I have a recent HVAC system and not too long ago I had to remove the blower and lube the bushings because it had frozen. This was with the AC Now, that's its cold and we turned the heat on the blower either comes on for a bit and then quits or doesn't come on at all. I can turn the AC on and the...

Blower not working [ 2 Answers ]

Blower/fan will not turn on, replaced the transformer, but not the answer any ideas

Blower not working [ 3 Answers ]

I've got a Rheem Furnace which has the blower in it. The blower is also hooked up to a Trane AC unit. The blower does not come on but I hear a buzzing noise coming from either the transformer, or relay. I figured it was either the relay or capacitor and replaced them both for about $25. The motor...

Blower on top of heat pump not working [ 1 Answers ]

I have a Coleman heat pump that is less than 2 years old and has worked well up until a couple of days ago. Now, the air conditioning and the heat will not work, but the fan and furnace still works. After checking things out myself for small problems with the electrical box, etc, I noticed that...

View more questions Search