Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Leviton PR180 with fluorescent lighting
[ 14 Answers ]
Hi everyone, This is my first question on the forum so here goes... A while back I installed a Leviton PR180 Motion Detector Light Switch in my laundry room and it worked beautifully. Earlier today I installed a 2-bulb fluorescent fixture in place of the incandescent fixture and this is...
Q's About Compact Fluorescent Recess Lighting
[ 9 Answers ]
I have a couple q's about some of the compact fluorescent recess lights I've been looking at from Halo. I'm planing out some lighting for the front of my garage and I will be using these in the soffits in front of the garage door for accent lighting/wall wash. I'm curious what the difference is...
Low voltage wiring
[ 4 Answers ]
I am trying to wire some low voltage puck lights. I'm confused as to how to wire them. The trasformer has a black and a white where the 120V goes in and 2 red wires where the 12V leaves. Are both the red wires hot? Is there no neutral? Since the puck lights have 2 wires coming off them, how do I...
Low voltage wiring
[ 1 Answers ]
I'm installing low voltage fire alarm wiring in a drop ceiling. Can I support it on the ceiling wire.
Flickering fluorescent tube lighting
[ 3 Answers ]
Hi. I have the long fluorescent lighting fictures in my den (2 long fluorescent bulbs per ficture). One of the fictures (both bulbs) are flickering... more like they are half on than flickering, kind of give off a grayish appearance. I put in 2 new bulbs but got the same issue. I installed a new... View more questions Search
|