Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to Vent additional washroom.
[ 2 Answers ]
Am installing basement washroom, tub toilet sink. Will be very close to the large copper stack that all the rest of the house drains into. There is a vent from the laundry tub that goes in to that stack at a higher level. Do I need to vent all 3 new units and where do I install the vents? Close to...
Building a washroom in the basement
[ 3 Answers ]
I am planing on building a washroom in my basment. The problem I have is that I don't have any extising swer or dranage lines where I am planing to build.. I am thinking of using the flood drain line to hook up my dranage and swer lines. Is this a good idea? Do I have to take in to consideration...
Building anew washroom in basement
[ 1 Answers ]
I broke the foundation in my basement why is it that I have so much water even after I pump it out I'm building a bath
Venting for basement washroom
[ 1 Answers ]
We are looking to install a washroom (toilet and sink) in our basement. There is a rough-in for the toilet - black pipe with cap- but no other pipes visible. Our home is about 5 years old, and this was installed at the time of construction. We have been told that in order to vent the toilet and...
Low water pressure in an area known for high pressure
[ 3 Answers ]
Greetings, My wife and I are in the process of updating 1957 side by side split level. The previous owner (OK, my Mom as I bought the house I grew up in from her) said that when they moved in they had to install a pressure reducer into the line. I have searched high and low but, I can't see... View more questions Search
|