Ask Experts Questions for FREE Help !
Ask
    loveverhurtnever's Avatar
    loveverhurtnever Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 8, 2007, 05:46 PM
    Toro belt tension
    Hello, I am glad I found this site, I have a fairly new riding toro mower, I had to put on a new belt today and there is no tenison device that I can find, my book shows nothing about the belt tenison... HELP
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Oct 9, 2007, 06:22 PM
    There must be a tensioner somewhere. How else could you engage it? Keep looking. Some units have one belt that is always tight, but it has to have an engagement pulley on a belt somewhere.
    loveverhurtnever's Avatar
    loveverhurtnever Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 9, 2007, 06:38 PM
    I had to hook a spring back up with the new belt, one belt does it all, there was a little black thing... that had a pin in it. Could that be it? Sorry, don't know much about mowers... but trying to learn so I can mow this farm
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toro 57360 drive belt [ 1 Answers ]

Can not find the proper drive belt for the Toro Model 57360; serial number 6000327. Does someone know where to order this part? The last two belts I ordered did not fit. Thanks

Clothes dryer tighten belt tension [ 2 Answers ]

We've replaced the belt on our GE model DDP1380 SDMAD clothes dryer, but the belt's too loose. It's the same length as the old, broken belt. Is there any way to increase the tension on the idler pulley?

How do I change the blade belt on Toro 12OVHO 6.5 HP GTS Mower [ 1 Answers ]

I have a Toro 6.5 HP GTS lawn mower, model #12OVHO. The belt has slipped off. After removing the blade and the cover, what else do I need to remove or loosen to be able to put the belt back on the blade's flywheel?

Diagram for replacing lawn mower belt on Toro 1744HXL riding mower [ 1 Answers ]

I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower

Replacing traction belt on toro 57360 with manual [ 1 Answers ]

1980 11hp 32" cut riding mower. Found a surprise when attempting to follow instructions. Removed blade clutch mount bolt and the cutter blade assembly is supposed to drop off the engine crank to enable belt removal. No! There is a thing called the Clutch actuator, which is used by the...

View more questions Search