Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I change the blade belt on Toro 12OVHO 6.5 HP GTS Mower
[ 1 Answers ]
I have a Toro 6.5 HP GTS lawn mower, model #12OVHO. The belt has slipped off. After removing the blade and the cover, what else do I need to remove or loosen to be able to put the belt back on the blade's flywheel?
Diagram for replacing lawn mower belt on Toro 1744HXL riding mower
[ 1 Answers ]
I need a diagram for replacing the belt in the mowing deck of a Toro 17-44HLX riding mower
Toro 57360 Clutch locked in engaged mode
[ 2 Answers ]
Cannot shift when engine running, and mower keeps trying to move forward. Installed new belt. Ran following test: Park Brake ON Wheels chocked Tranny in neutral Clutch Depressed or Not depressed (makes no difference) Transaxle pulley still turns.
Replacing traction belt on toro 57360 with manual
[ 1 Answers ]
1980 11hp 32" cut riding mower. Found a surprise when attempting to follow instructions. Removed blade clutch mount bolt and the cutter blade assembly is supposed to drop off the engine crank to enable belt removal. No! There is a thing called the Clutch actuator, which is used by the...
Toro rider slows in drive, then won't start, wheels don't turn
[ 1 Answers ]
I was mowing today when my Toro wheel horse rider model 70040 (electric start) began to slow down. I was driving along in 4th gear, and I noticed it was going pretty slow, it felt more like 2nd. I stopped, backed up, thinking there may have been something under me slowing me down, and it reversed... View more questions Search
|