 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
how to connect one vcr to another on to record
how can I connect vcr's to record from one vcr to other one.
how do I connect two vcr's one to play and the other one to record? How can hook up them up? Please sent a picture to how hook them up together. Thank you. jerryoe |
||||
|
||||
|
What you need is a set of RCA cables. They're the ones with the yellow, red, and white ends. On the back of the VCR in which you want to PLAY the tape, find the OUTPUT jacks. Plug one end of the cables into their respective jacks according to color. On the back of the VCR in which you want to RECORD, plug the other ends of the cable into the INPUT jacks according to respective color.
|
||||
|
||||
|
Of course this is quite simple, however, I hope that you are going to be recording private "home made" videos of sports events or your kids, or your family. Because the movies that are sold to you all have copyright laws and you will be in violation of copyright laws. Not being smart or anything, just cautioning you if you were not aware of such.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have Direct TV box and would like to connect a Sharp LC20S2U LCD TV and a JVC HR-XVC37U DVD/VCR. I want to be able to watch TV while the VCR is recording another station. I also have a separate outdoor Antenna that gets very good reception for local stations. I would like to be able to use that...
I have a Zenith VCR I would like to connect to an old Samsung TV (UHF/VHF). I have a Radio Shack "75 to 300-Ohm" connector. When I use the connector, I get an extremely snowy picture and cannot get the program to set up even though I can barely see the menu. Without the VCR the TV has a great...
I have a new Sanyo HDTV, a Directv box with DVR, a DVD player, and a VCR. How can I connect them all so I can use my Directv remote to operate all 3, or isn't that possible? All 3 units have composite connection jacks, and the DVD, Satellite box and TV have s-video jacks. I don't need the VCR to...
Hi I have been trying endlessly to record on my vcr from my satellite dish. I have a bell express view 4100. I have re-arranged the cords till I can't remember what I last did. I would like very much to record a tv program to my vcr and watch later. Whenever I have tried to do it all the tape...
I have a rca big sreen TV, digital cable box, vcr and dvd recorder. I can't seem to get it all connected properly by following the TV instruction guide or the dvd recorder instruction guide. I would like to be able to record dvd's from old vcr tapes, plus be able to have a strong enough signal to...
View more questions Search
|
