Ask Experts Questions for FREE Help !
Ask
    kc_ryland's Avatar
    kc_ryland Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 24, 2007, 09:13 AM
    How do you connect VCR to old TV?
    I have a Zenith VCR I would like to connect to an old Samsung TV (UHF/VHF). I have a Radio Shack "75 to 300-Ohm" connector. When I use the connector, I get an extremely snowy picture and cannot get the program to set up even though I can barely see the menu. Without the VCR the TV has a great picture. Without the TV, the VCR works just fine on DirecTV or Cable.

    Any ideas?
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #2

    Sep 24, 2007, 09:58 AM
    The cable from the OUTPUT of VCR should run through the adapter to the UHF

    Connections on the TV... Now make sure TV and VCR are both set to the same

    Channel ( 3 0r 4 ) --- insert VCR tape and test... Try different cable if you still

    Have a problem... If this helps please rate this answer!?
    smibob's Avatar
    smibob Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 30, 2010, 07:08 PM

    My problem toshiba TV doesn't have video 2 or video1 after connecting a new blu ray disc player
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to connect LCD TV, DVD/VCR and Cable [ 2 Answers ]

I have Direct TV box and would like to connect a Sharp LC20S2U LCD TV and a JVC HR-XVC37U DVD/VCR. I want to be able to watch TV while the VCR is recording another station. I also have a separate outdoor Antenna that gets very good reception for local stations. I would like to be able to use that...

How do u/I connect a dvd recorder plus a vcr and a satellite receiver all together? [ 4 Answers ]

Can some one tell me how do u/I connect a DVD recorder plus a VCR and a satellite receiver all together? I also picked up an r f modulator and an s-video cable plus another set of cables one 3prong audio/video thingee and one extra single prong cable for video in/out . So how do I hook all this up...

Connect Directv- TV, dvd, vcr [ 1 Answers ]

I have a new Sanyo HDTV, a Directv box with DVR, a DVD player, and a VCR. How can I connect them all so I can use my Directv remote to operate all 3, or isn't that possible? All 3 units have composite connection jacks, and the DVD, Satellite box and TV have s-video jacks. I don't need the VCR to...

How do I connect Toshiba VCR/DVD, Directv and TV (coax cable only) [ 4 Answers ]

Can anyone assist me with connecting vcr/dvd combo, directv and TV? I have tried everything and I have had no success. The television has a coax cable. I tried connecting the vcr/dvd through the satellite and receive no sound or picture. Any suggestions are much appreciated. Thanks!

Connect TV,vcr,cable,dvd recorder [ 2 Answers ]

I have a rca big sreen TV, digital cable box, vcr and dvd recorder. I can't seem to get it all connected properly by following the TV instruction guide or the dvd recorder instruction guide. I would like to be able to record dvd's from old vcr tapes, plus be able to have a strong enough signal to...

View more questions Search