Ask Experts Questions for FREE Help !
Ask
    ahavis's Avatar
    ahavis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2007, 03:07 PM
    HEIL Furnace Air Cycler shuts off prematurely
    Hello,

    I have a HEIL furnace Mod# NTC6150KJA1. The air cycler timer is set for 30 minutes and once the time expires, the air cycler kicks on for about 3 seconds and then shuts off. It kicks on again 2 seconds later and stays on for 3 seconds and then shuts off. It continues this cycle for a while before resetting the timer. 30 minutes later, the same circumstance repeats.

    It appears that something is stopping the air cycler from continuing it's cycle and I have no idea how to fix. Any assistance is sincerely appreciated!

    Thanks and best regards,

    Aaron
    tsa7man's Avatar
    tsa7man Posts: 154, Reputation: 9
    Junior Member
    		  
    #2

    Oct 16, 2007, 05:34 AM
    Did you solve your problem, just checking being this is an old post, and I troubleshoot Heil ( ICP) brand furnaces... there could be a number of items causing the unit to cycle as you described...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace [ 10 Answers ]

I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...

HEIL furnace [ 1 Answers ]

Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion?

Heil furnace [ 2 Answers ]

I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info

Blower won't come on Heil furnace [ 2 Answers ]

I have a heil furnace in a home I just purchased. The first day it worked fine. Second day, it fires up, I can hear a motor running, but the blower doesn't come on. Relay switch? Thank You!

Heil 92% H9MPDO75F12B Gas Furnace [ 1 Answers ]

I had a Heil Gas Furnace installed and from the first day I notice that when the blower came on the air was on the cool side. After about 1 to 2 minutes the air became a little bit warmer but never got hot. My question is this normal or do I have a problem? Please let me know as soon as possible so...

View more questions Search