Ask Experts Questions for FREE Help !
Ask
    pacermb's Avatar
    pacermb Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2007, 09:05 PM
    Vacuum breaker
    I know there is a way to plumb a dishwasher in without having a vacuum breaker on your sink but I have forgotten how. Can someone help me?
    tattooed68's Avatar
    tattooed68 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 26, 2007, 09:30 PM
    If you have a garbage disposal,run the drain line from the d/w to the side intake just below the lock ring.if you don't,you can purchase a tail pipe with a side intake at any hard ware store.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Sep 28, 2007, 07:44 PM
    [QUOTE=pacermb]I know there is a way to plumb a dishwasher in without having a vacuum breaker on your sink but I have forgotten how. Can someone help me?[/QUO


    Take the drain hose and secure to thoe top of the underside of counter then bring it back down to the drain or disposal. This will serve the purpose very well
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

Replacing Circuit Breaker with Higher AMP Breaker [ 8 Answers ]

Excuse me, I did look at the code book as is suggested in your Sticky. The NFPA may answer this question, but I am not knowledgeable enough to recognize it: Our offices are upstairs in an older (renovated home) building with modern wiring. We have 4 computers, 3 printers, and miscellaneous with...

New 15A breaker trips main 100A breaker [ 6 Answers ]

Hi, I've been finishing my basement and I added a few 15A breakers One room has 8 outlets in series with the first starting about 6 feet from the main panel. There is currently no load on this outlets. When installing the drywall I accidentally shorted the outlet closest to the panel. It...

Replacing a circuit breaker with a GFI breaker- q on neutrals [ 1 Answers ]

In process on installing withquestion on neutral wires. Do you take the neutrals out of the in the main panel neutral and put them in into the breaker where its labelled "load neutral terminal" and only have the neutral "pig tail" to the panel neutral bar? Thanks!

FEBCO pressure vacuum breaker repair kit [ 2 Answers ]

It seems the kit(#905211) to repair a FEBCO pressure vacuum breaker includes an extra O-ring, is this true or am I not assembling it correctly. Thanks for your help!

View more questions Search