 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Oven in gas stove will not light, but pilot is on.
I have a gas stove in my apartment and was going to do some baking. I go to turn on the oven to preheat it and 30 minutes later... no gas, and the strip under the plates on the bottom of the stove is not lit up with fire. The pilot light is working down there and the stove top burners work. So why is the oven not working?:mad:
|
||||
|
||||
|
The most common problem is called a faulty thermocouple,almost all hardware stores and applience stores have replacement thermocouples and by removing the old faulty one(by turning the screw in end and removing the other end where the flame hits it) and bringing this with you to the store you can replace it in just about 5 min.
Hope this helps! Ken |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
I can't get my gas log pilot light to light.
I have the same problem as the person who asked about getting their wall heater to light. The answer was to make sure the flame was touching the thermocouple.. . But how do you do that? I can't make the flame higher, so do I move the thermocouple lower and what does a thermocouple look like...
Can anyone help me with lighting the pilot under my gas stove?
My furance is about 25 years old and the gas pilot light is out. How do I relight the pilot light? Can some one please help me on this. I would like to get some heat into my house. It is a climatrol furance
View more questions Search
|
