Ask Experts Questions for FREE Help !
Ask
    melonie's Avatar
    melonie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 20, 2007, 05:03 AM
    Hole in bathtub
    How do I repair a hole in a cast iron tub? The tub is new and when tile was being put on the wall,a piece fell and put a small hole in bottom of tub and knocked out some paint around hole.. please help! melonie
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Sep 20, 2007, 10:38 AM
    Try fingernail polish
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hole in my gum [ 1 Answers ]

A couple of months ago I had a tooth infection, and recently I have noticed a small gap in my tooth and the gum itself. I then took a small cotton bud and rubbed it against the hole and it had a funny smell to it. I do smoke and drink so do you think this is the problem for it? I can sometimes...

Digging a hole [ 1 Answers ]

If it takes 2 days for 4 men to dig a hole 1 metre wide by 2 metres long and 1 metre deep, how long will it take 2 men to dig a hole 2 metres wide, 3 metres long and 1.5 metres deep?

Hole in stucco [ 1 Answers ]

I have a 12 x 6 hole in my stucco wall. What is the best way to repair it? Is goes all the way to my kitchen main plumbing, as in I can look at the big copper pipe from outside. Thanks for the help. Christine

Removing bathtub spout - no hole [ 5 Answers ]

Hi, I have read the Q/A's on the site, but can't find an answer to this one. First, I have a Delta faucet. It looks like Delta Faucet T13422-SOS on the www.deltafaucet.com website. (There are a few more that look like this, but it has the diverter plug on the spout.) The difference is that...

View more questions Search