Ask Experts Questions for FREE Help !
Ask
    hetem's Avatar
    hetem Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 15, 2007, 07:04 AM
    Kenmore dryer model 110.72852100 does not get hot
    Hello,

    This Kenmore dryer recently started not to get hot. Basically when the start button is pressed the dryer starts working, but no heat is generated inside it. The lint filter has been cleaned on a regular basis.
    Any ideas would be appreciated.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Sep 15, 2007, 07:12 AM
    Not only does the lint trap deen to be clean but also the exhaust hose from the back of the dryer all the way out to where it exits the house. Also lint builds up inside the unit where the linlet and outlet screens are and the blower motor itself. You also need to remove the blower housing and clean all thouroughly. I have seen these problems more than any other when it comes to heating. Next check the element.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore Elite Dryer Model #110.60936990 not getting hot [ 2 Answers ]

I have a Kenmore Elite Dryer Model #110.60936990 and it is not heating up. When you press the start button and let go the dryer will start but then it stops right then, but if you hold the start button it will continue to run until you let the button go and it will not get hot while holding the...

Kenmore Dryer Model 110.86873100 [ 1 Answers ]

Where is the heating element located on a Kenmore Dryer, Model #110.86873100?:)

Kenmore Dryer model 110.96272100 [ 5 Answers ]

Please help: My Kenmore dryer has been shutting itself off after a few minutes; before completing its cycle, it will restart when pushing the start button. But will shut off again after a few more minutes.

Kenmore Dryer - Model 110.96281100 [ 1 Answers ]

I have a Kenmore dryer - model 110.96281100 which stops mid-cycle or won't start at all. Removing the timing unit revealed a bit of black dirt which I cleaned. It worked fine for about 2-3 days but then went back to same old status - sometimes starting, sometimes not. I'm trying to figure out if...


View more questions Search