Ask Experts Questions for FREE Help !
Ask
    uptech2000's Avatar
    uptech2000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2007, 09:28 AM
    How to upgrade 2 30amp sub fuse box to Ciruit breaker
    Hi this my first time posting on this site... I have up on the second floor a 2 30amp fuse sub panel that control 60% of the electrical on the apartment. How do I convert the fuse box to a Ciruit Box? Can I do it myself or should I hired an license electrician and how much will it cost? Thanks you...
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Sep 11, 2007, 01:44 PM
    Before trying to do this yourself, since you mention "apartment", most states do not allow DIY'ers to do their own electrical work in multi-family dwellings, along with insurance companies.

    Replacing a fuse box to breakers is fairly easy for those that are qualified and knowledgeable of wiring, panels, etc.

    Only you can tell us if you have the ability to replace the panel. Quite frankly, if you need to ask how, then that is another reason to hire a pro.

    As far as cost, this is difficult to speculate, depends on the market your located in. Rural Idaho will be much cheaper than downtown Boston. Also depends on the types of materials needed, and the type of construction involved.

    Sorry not much help, but that is the best I can provide at this time based on the info available.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing fuse box with Circuit breaker panel [ 3 Answers ]

I want to replace an old fuse box with a circuit breaker panel. Do I need a 200 AMP service? (considering putting in air conditioning in the future). The house has two apartments so I want to make sure there is adequate service. As I know absolutely nothing about this, what questions should I...

Fuse box is warm [ 7 Answers ]

I smell something like melted rubber or plastic. I finally found where it was coming from, which is my fuse box. The box feels warm (a little, not hot) and it smells like melted plastic. Is this something that could be dangerous? I'm scared to go to bed tonight, especially since it's located in my...

Fuse box [ 2 Answers ]

My fuse box makes a barely audible cracking/popping sound. You can't hear it unless you open the door. What it could be?

Need to upgrade circuit breaker from 20A to 30A [ 3 Answers ]

I have been having a problem with my heat pump unit. I live in a new house, and it worked fine for the first two years I've lived there. Lately, the circuit breaker to the outside unit has started tripping regularly during periods of extended use (i.e. hot in summer, cold in winter). I've had an...

A/C fuse box height [ 1 Answers ]

I am moving an exterior a/c compressor to a new location and have to move the breaker box too. It is currently at 48", is that a code requirement or can I locate it lower to 36". Thank you

View more questions Search