Ask Experts Questions for FREE Help !
Ask
    g lowry's Avatar
    g lowry Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 31, 2007, 09:08 AM
    Ampacity Ratings
    I need help finding ampacity ratings for the following type wires coatings - FRXLPE and FREPR, 90 deg C and 105 deg C. I am unable to find any type of ratings in the NEC.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Aug 31, 2007, 11:36 AM
    This appears to be a fairly comprehensive catalog that should help you:

    http://wecselectric.net/cable/BICC_WHOLE_CATALOGE.PDF

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the ampacity for 8 AWG wire? 50 or 40 [ 12 Answers ]

Every electrician I ask tell me different story This is important since wire are very expensive I am need to connect an air-condition rated 240 50 Amp 3 wires (2 hot and ground) According to the NEC Table 310.16 Allowable Ampacities of Insulated Conductors Rated 0 Through 2000 Volts, 60°C...

Home Furnace Efficiency Ratings [ 1 Answers ]

I'm looking to build a house and so going through the process of understanding the details of the specs. Right now the builder uses an 80% Efficiency model, but others use a 90%. Is the 10% worth the investment to upgrade to (have not asked what that is). What number should I be looking at or...

Vent size and fixture ratings? [ 3 Answers ]

Hello, I have a very old house and I'm trying to upgrade portions of my DWV plumbing. I am trying to figure out what size my main vent should be. I previously replaced the old 1.5-inch galvanized main vent because it failed, but I only replaced it with 1.5-inch PVC. I believe that it would...

Ratings... [ 1 Answers ]

Hello: I'm relatively new here, and I'll bet you've had this discussion before... But, I don't want to look it up. The ratings (or whatever they're called), suck. I always new it. I just didn't want to rock the boat. It's the agree or don't agree thing. A newbie (on this site) recently...


View more questions Search