Ask Experts Questions for FREE Help !
Ask
    cathyogar's Avatar
    cathyogar Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 4, 2007, 07:02 PM
    Hot Water turns off shower head?
    When running only cold water the shower works. When hot water is added to the mix, the shower head stops delivering water. Any suggestions? Thanks!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Aug 5, 2007, 06:19 AM
    Please give us the brand name , age and model number of your shower valve.
    cathyogar's Avatar
    cathyogar Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 5, 2007, 06:55 AM
    Quote Originally Posted by speedball1
    Please give us the brand name , age and model number of your shower valve.

    I'm afraid I don't know what the model is. The tub fixtures were replaced about 2 years ago. The shower head has been there for many years for nore than the 12 years I have lived here. The house is about 90 years old.

    Today when I checked it neither cold nor hot is going to the shower head,,

    Thanks!
    stew_1962's Avatar
    stew_1962 Posts: 255, Reputation: 10
    Full Member
     
    #4

    Aug 5, 2007, 08:30 AM
    Take the shower head off, see if the water is getting there at all. Is this a tub/shower combo? I would assume if so, the water comes out of the tub spout.

    This will tell you if the shower head is clogged, the diverter, or the mixing valve is at fault.

    Let us know.
    cathyogar's Avatar
    cathyogar Posts: 3, Reputation: 1
    New Member
     
    #5

    Aug 5, 2007, 10:08 AM
    Quote Originally Posted by stew_1962
    Take the shower head off, see if the water is getting there at all. Is this a tub/shower combo? I would assume if so, the water comes out of the tub spout.

    This will tell you if the shower head is clogged, the diverter, or the mixing valve is at fault.

    Let us know.
    The is a tub shower combo.

    Without the shower head on, there is a small stream, under fairly low pressure, coming out of the top pipe. The amount and pressure of the water coming out of the top pipe is much lower than you would expect based on the amount of water that comes out of the tub faucet before switch to the shower.

    Thank you.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Hot Water to shower head, but Hot water to the Tub? [ 2 Answers ]

My husband and I just purchased a new house. We have found that the shower pressure in the bathroom is wonderful however once you have set the right temp from the tub spout and switch over to the shower no hot water makes it to the shower head. We can only turn off the cold water completely in...

Hot water turns off in shower when someone else uses water [ 5 Answers ]

The water temperature changes drastically when taking a shower when someone else turns on another faucet or flushes the toilet. Is there any way to prevent this? Thanks.

Leaking Shower Head (hot water) [ 1 Answers ]

I've been having a problem with the shower in my basement. The hot water is leaking from the shower head when the hot water is turned off from the knob. It started as a slight drip but now it is a steady stream. In the meantime, I have turned off the hot water connecting to this bathroom as to...

Hot water in the shower until shower head installed [ 6 Answers ]

I have hot water in all my other faucets/showers. I also have hot water at the particular shower with the problem as long as a shower head is not installed. When I install the shower head, the water is lukewarm. Any ideas for the source of the problem, and how to fix?

No Hot Water in Shower Head [ 4 Answers ]

Hi everyone! I'm at a loss with this one. I have hot water coming out of the bathtub tap when the Moen valve is set to the hot position. However, when I try to use the shower, the hot water coming out of the shower is almost the same temperature as on the full cold setting on the Moen valve. I...


View more questions Search