Ask Experts Questions for FREE Help !
Ask
    GKJSG's Avatar
    GKJSG Posts: 11, Reputation: 1
    New Member
    		  
    #1

    Jul 23, 2007, 04:24 AM
    Repair cost
    Due to a recent question and response we discovered that our 97 Monte Carlo may need to have the head machines, valves checked for damage and the head gasket replaced.
    Can anyone give us an idea of cost on the above mentioned repairs? If it helps: We live in the midwest, Indiana to be specific.
    Thanks
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 23, 2007, 06:33 AM
    I would guess that cost estimates would range between $1,800 and $2,200.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cost of end. Inv. And cost of goods sold under average cost [ 1 Answers ]

It's me again! I have another question to the same problem. In case someone else responds, I'll post the problem again. June 1 inv20051000 June 12 purch.30061800 June 23 purch. 50073500 June 30 inv. I need to compute the cost of the ending inventory and the cost of goods sold using the...

Cost to repair the condenser [ 1 Answers ]

My A/C stopped working. I had Home Warranties to send someone down to check the problem. They found out that the air conditioning system as the compressor is full of mud, the evaporator coil is full of leaks from the dirt impacting the system and unit ran without freon, the condenser coils are...

Cost of line repair? [ 3 Answers ]

I've been quoted about $2,300 to repair the line running from my house to the sewer. It's between 50-60 feet, with a clean-out pipe near the house. The depth is probably about 4 feet at the shallowest point and around 8 or 9 feet or so at the deepest. It does not appear that the water line runs...

View more questions Search