 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lite brown thick looking oil in my 92 monte carlo
I kept losing water in my monte carlo so I replaced the water pump because it was leaking. I also replace the termastate because the car was over heating. After replacing those parts I was still losing water and I did not see any evidence of water anywhere. I went to change my oil and notice the level was high on the stick and it was a lite brown and very thick.
|
||||
|
||||
|
The head may have warped, due to overheating. This usually results in a leaking head gasket, where antifreeze and/or oil are either burned in the cylinders or antifreeze gets into the crankcase. It will likely require the head be machined, valves inspected for damage, and the head gasket replaced.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
That 1 you see as a response to my boiler question was to redirect my boiler question to heating and cooling. Please refer to boiler burner dripping below. Still need an answer as am not willing to have the tricky oil companies service my problem after causing it. They want to see more dollars...
One of the problems with derivative pricing models is that it assumes volatility is strictly proportional, so that if the stock price doubles, we assume that the volatility of the asset price will double as well. However, empirical tests suggest that the volatility doesn't?t go up as much as our...
I need help. I just got off the depo shot about 3 months ago. The month of Feb I have been having thick brown clotting discharge 3 different times. I have to wear pantie liners because I don't know it will start again. This is the 2nd of March and Im having it again but this time its doubled. I...
I have bought a nintendo ds lite in canada for my daughter as we are moving there early next year, my question is how do I use it in england as it has a two prong plug and the voltage is different any help appreciated:confused:
:confused: I recently installed a flouresent lite fixture and after being on for ten or fifteen minutes, it shuts off. Is the ballast bad or something else going on? Thank-jb.
View more questions Search
|
