Ask Experts Questions for FREE Help !
Ask
    stanstuf's Avatar
    stanstuf Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2007, 01:12 PM
    Hamton bay fan remote
    When I turn the fan light off with the remote ,it goes out and it comes back on by itself .
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 17, 2007, 03:09 PM
    Try changing the frequency of the fan and remote.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hamton Bay Fan - Noisy [ 2 Answers ]

The remote control works fine. My problem is a pulsing noise which is loud on high speed and less on each of the other speeds. The blades remain constant on which ever speed that is chosen. I'm looking to find the cause of the pulsing noise. Is it the receiving unit for the remote? Thanks

Tip: Hampton Bay Remote Fan - Fan works by remote, lights do not. [ 10 Answers ]

I figured this may help somebody here. I have a Hampton Bay remote controlled ceiling fan... the kind without pull chains... and the remote will only operate the fan portion but not the light. The light is always on. Not a big deal, as the light switch on the wall could be used to turn the light...

Hamton Bay sailwind fan AC390-LRU [ 1 Answers ]

Hi We have the above fan outside on our patio. For some reason, the fan paddles are not pushing enough air downward. We have tried both directions and it was installed by a licensed electrician. We are thinking of replacing the paddles since they are made of canvas and feel that there isn't...

Remote for Hamton Bay Ceiling Fan not working - no wall or chain switch [ 4 Answers ]

I have changed the batteries in the remote, checked to make sure the toggle switches are in the same position in the remote and on the fan, checked the electrical switches and still neither the fan nor the light will come on. Any suggestions on what to do next before just replacing the remote?

Hamton Bay Fan - Windward II [ 2 Answers ]

I have six of the above fans and the lights ontwo fans have stopped working. The fans are approximately 2 yeas old. I have tried new light bulbs wit no affect. Does anyone have any ideas as to what to try next? Thanks in advance, Ed

View more questions Search