Ask Experts Questions for FREE Help !
Ask
    allypally229ally's Avatar
    allypally229ally Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2007, 12:37 AM
    Hampton bays fan how to disassemble
    Okay well I thought my fan broke because I went to home depot and they guy told me its not the remote since the tiny blinking light still worked on the remote.

    It was the box thing on the inside of the fan.. now I'm trying to change the box and

    I took off the light part and I'm on the part wear it's the motor and the thing wear the blades are attached how the heck do I take it off.. I did not assemble it so I don't know.

    I can see the box but can't get to it
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 13, 2007, 06:55 PM
    How long ago did you buy your fan? It might be easier for you to take it down and return it for a replacement under warranty.
    allypally229ally's Avatar
    allypally229ally Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 13, 2007, 08:49 PM
    ahhhh I got my dad to help me =] the box thing I got I was thinking to put it in the wrong place its supposedly go in the top part bubble closest to the ceiling but the box thing I got was too big to fit.. so I'm just going to get a new fan because its not that old but I think the warranty expired

    thanks any way
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jul 13, 2007, 11:02 PM
    It's in different places on different fans. It can be replaced though.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Disassemble bath tub drain [ 2 Answers ]

I have a cross metal piece near the top of the drain and I have hair buildup between the cross and the trap. Is the top of the drain a threaded piece? If so , what tool do I use to take it apart? I can't fit a bent wire down through the X. Hope this is clear.

Hampton Bays outdoor lantern [ 2 Answers ]

Hello. We just purchased a Hampton Bays outdoor wall lantern at the home depot which is equipped with a photo cell and a sensitivity mode.I installed the Lateran exactly as directed and fellowed the instructions to set the mode to operate automatically. I set the sensitivity switch on the...

Hampton Bays ceiling fan [ 2 Answers ]

I just had a Hampton Bay ceiling fan installed. I have the remote control (It works) but I would prefer to use a wall switch to turn on/off the two lighted portions (St. Regis 60" fan, model #138498). The installer told me that "could not be done" because there is only one wire feeding power to...

View more questions Search