Ask Experts Questions for FREE Help !
Ask
    mommy8592's Avatar
    mommy8592 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2007, 04:22 PM
    Craftsman weedeater
    My craftsman weedeater won't start. I have changed the spark plug, put all new fuel mixture, and placed the choke lever in the OFF CHOKE position; then pulled the rope to clear the engine of excess fuel.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 9, 2007, 04:32 PM
    Just checking but did you gap your plug at .030 and use a 40:1 mix of fuel? Does it pop or cough at all?
    mommy8592's Avatar
    mommy8592 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 9, 2007, 04:37 PM
    Yes I gap the spark plug and did 40:1 mixture. No noise at all.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman weedeater [ 1 Answers ]

My craftsman is a little hard to start, but when it does I give it fuel it stops what could be wrong and is it something that I can fix.

Restringing a Craftsman Weedeater [ 1 Answers ]

Hello, I have a Craftsman weedeater Mod. # 358791540 and I can not figure out how to put new string onto the spool. Any help would be appreciated, thanks in advance.

Craftsman weedeater carb [ 2 Answers ]

I need to know how to set the adjustments screws on the carborator of a walbro carb-Modle#wt298.How far to turn each screw.

View more questions Search