Ask Experts Questions for FREE Help !
Ask
    llgsdad's Avatar
    llgsdad Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 19, 2007, 01:56 PM
    Restringing a Craftsman Weedeater
    Hello, I have a Craftsman weedeater Mod. # 358791540 and I can not figure out how to put new string onto the spool. Any help would be appreciated, thanks in advance.
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #2

    May 19, 2007, 02:20 PM
    I used to have a cheap craftsman weedeater I'm not sure what the model was but you had purchase the whole head that came with the string already installed. I think it was about 9 dollars.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Weedeater won't stay running [ 5 Answers ]

I have a convertible craftsman weedeater that has run like a champ - until now! I can get it to run briefly, a few minutes at most, then it dies and will not restart. After reading some similar posts I am beginning to suspect either an in tank filter or the inlet filter on the card Sound...

Craftsman weedeater carb [ 2 Answers ]

I need to know how to set the adjustments screws on the carborator of a walbro carb-Modle#wt298.How far to turn each screw.

Craftsman Weedeater Starter Rope Replacement [ 2 Answers ]

I'm trying to replace the starter rope on my Craftsman Weedeater. Can you tell me how to remove the clutch assembly from the shaft?

Weedeater [ 4 Answers ]

I have a Weedeater model XT 20T. A month ago when it last worked the engine would konk out. I was able to finish the job after several restarts. Finally wouldn't start at all. I replaced the deteriated fuel line, put a new spark plug in it, used fresh gas, and cleaned the air filter. Still...

View more questions Search