Ask Experts Questions for FREE Help !
Ask
    JBoogie's Avatar
    JBoogie Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 9, 2007, 01:18 PM
    Murray riding mower not restarting
    I have a 12.5 hp Murray riding mower that refused to start the other day (just clicked at me). After a few minutes of reading on this forum I got it started by jumping it off. After shutting it off it won't restart.. The clicking returns and jumping it off is the only way to get it restarted. The ignition and soloniod (sp) are good and the batt is fully charged. I am thinking that the batt isn't charging or the starter is on its last leg.. Any suggestions on what the problem might be?

    Thanks!

    J.
    lklingjr's Avatar
    lklingjr Posts: 3, Reputation: 1
    New Member
     
    #2

    Jul 10, 2007, 07:14 PM
    Quote Originally Posted by JBoogie
    I have a 12.5 hp Murray riding mower that refused to start the other day (just clicked at me). After a few minutes of reading on this forum i got it started by jumping it off. After shutting it off it wont restart.. The clicking returns and jumping it off is the only way to get it restarted. The ignition and soloniod (sp) are good and the batt is fully charged. I am thinking that the batt isnt charging or the starter is on its last leg.. Any suggestions on what the problem might be?

    Thanks!

    J.
    I had the same problem with mine.I was told that the coil isn't the problem here what I was told to do.the single wire that pluges in under the coil disconnect it and try to startit.if it starts go to the seat lift the seat up and unplug the connection you will see two holes where the wire plugs fit.look between the holes there is a piece of plastic that separate the hole take a knife and pull the plastic out there is a spring under the plastic remove it and plug the socket back.now replace the single wire back in the coil and try to start it.it sure worked for me starts every time
    lbarrera3's Avatar
    lbarrera3 Posts: 1, Reputation: 1
    New Member
     
    #3

    Jul 11, 2007, 10:05 AM
    Quote Originally Posted by JBoogie
    I have a 12.5 hp Murray riding mower that refused to start the other day (just clicked at me). After a few minutes of reading on this forum i got it started by jumping it off. After shutting it off it wont restart.. The clicking returns and jumping it off is the only way to get it restarted. The ignition and soloniod (sp) are good and the batt is fully charged. I am thinking that the batt isnt charging or the starter is on its last leg.. Any suggestions on what the problem might be?

    Thanks!

    J.
    Your battery is low or needs a new one.I always start with a new battery.I`ll save you time & money in the long run.
    JBoogie's Avatar
    JBoogie Posts: 2, Reputation: 1
    New Member
     
    #4

    Jul 13, 2007, 10:32 AM
    Quote Originally Posted by lklingjr
    i had the same problem with mine.i was told that the coil isnt the problem here what i was told to do.the single wire that pluges in under the coil disconnect it and try to startit.if it starts go to the seat lift the seat up and unplug the connection you will see two holes where the the wire plugs fit.look between the holes there is a piece of plastic that seperate the hole take a knife and pull the plastic out there is a spring under the plastic remove it and plug the socket back.now replace the single wire back in the coil and try to start it.it sure worked for me starts every time
    I will def give this a try tonight! I want to make sure it isn't the starter before I spend $115 on a new one.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Murray riding mower [ 8 Answers ]

I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...

Murray Riding Mower [ 2 Answers ]

How can I safely raise mower up to change blades?

Murray riding mower [ 2 Answers ]

My Murray riding mower has decided to stop moving. I have one of those "automatic" mowers that move by pushing the pedal forwards or backwards. This past Saturday, I was mowing and it just stopped moving. The motor runs great and the deck blades still turn but there's no movement. The mower is only...

Murray Riding Mower [ 1 Answers ]

I have a 15x38" Murray. My drive belt keeps coming off. I got a new 73" belt from Outdoor Lawn Equipment. I can't get the belt on the back large pulley. The pulley is blocked by other parts. Can anyone help?

Murray Riding Mower [ 1 Answers ]

I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been...


View more questions Search